Furuno IF-NMEASC Operator's Manual page 14

3. ADJUSTMENTS
7. Push the [Menu/Cancel] button to light the Bps LED on the Port 2 line.
8. Push the [Enter] button. The Bps LED starts flashing and the current bps setting appears.
Offset
Port 2
Port 3
9. Push the [+] or [-] button to select desired baud rate. The choices are 4800, 9600, 19200 and
38400 (bps).
10. Push the [Enter] button. The bps LED stops flashing.
11. Push the [Menu/Cancel] button to light the Output interval LED on the Port 2 line.
12. Push the [Enter] button. The Output Interval LED starts flashing and the current output interval
setting appears.
Heading
Offset
Port 2
Sentence
Port 3
Sentence
Menu/
Cancel
Bps
LED
OUTPUT PROCESSING
0
Heading
Offset
Port 2
Sentence
Port 3
Sentence
Menu/
Enter
Cancel
OUTPUT PROCESSING
0 0 0 3
Heading Pitch
Sentence Bps
Sentence Bps
Menu/
-
Enter
Cancel
OUTPUT PROCESSING
0 0 0
Pitch Roll
Output
Bps
Interval
Output
Bps
Interval
-
Enter
0 0 3
Pitch Roll
Output
Bps
Interval
Output
Bps
Interval
- +
Current bps setting
(example: 4800 bps)
Other indications:
Roll
960: 9600 bps
Output
1920: 19200 bps
Interval
3840: 38400 bps
Output
Interval
+
Current output interval setting (Port 2)
25: 25 ms
100: 100 ms
200: 200 ms
1000: 1000 ms
2000: 2000 ms
+
6