Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.
Page 4
CAUTION Observe the following compass safe distances to prevent interference to a magnetic compass: Standard compass CU-300 0.70 m Attach grounding securely to ship's body. The grounding is required to prevent electrical shock. Steering compass...
Desktop Mounting... 2 Overhead Mounting ... 3 2. WIRING ... 5 Connection between One Processor Unit and One Memory Card Interface Unit ... 5 Connection between One Memory Card Interface Unit and Multiple Processor Units (Max. Three Units) ... 6 Connection between Two Memory Card Interface Units and Two Processor Units ...
19x4C-BB or GD-1920C-BB (NavNet VX2-BB) to provide a card drive(s) in a remote location(s). Power to the CU-300 is supplied from the processor unit. Maximum four units can be connected via a HUB. Note that the CU-300 can be connected only to the NavNet VX2 units which have the following software version No.
Page 7
Connection to single NavNet VX2-BB unit CU-300 Ethernet cable MJ-A6SPF0017-050C or 100C Connection to multiple NavNet VX2-BB units Power cable CU-300 MJ-A3SPF0026-050C or 100C LAN cable (CAT5, STP, straight) Power cable MJ-A3SPF0026-050C or 100C Model 18x4C-BB/19x4C-BB Model 18x4C-BB/19x4C-BB, GD-1920C-BB, Model 18x4C/19x4C, GD-1920C...
Page 8
Connection for two CU-300 Model 18x4C-BB/19x4C-BB GD-1920C-BB CU-300 Model 18x4C-BB/19x4C-BB GD-1920C-BB Power cable MJ-A3SPF0026-050C or 100C LAN cable (CAT5, STP, straight) : Standard supply : Local supply : NavNet VX2 : Option for NavNet VX2 CU-300...
1. MOUNTING The memory card interface unit can be flush mounted in a console, or mountd on a desktop or the overhead. Choose a mounting location for the unit considering the following points: • Leave sufficient space around the unit to facilitate checking and maintenance. See outline drawing at the back of this manual for recommended maintenance space.
Desktop Mounting This method requires the optional hanger FP03-10201. Name: Hanger (Type: FP03-10201, Code no.: 008-539-530) Name Hanger Self-tapping screw Pan head screw 1. Fasten four pan head screws (M4×10) to fix the hanger to the unit. 2. Fix the hanger with unit to the mounting location with four self-tapping screws (φ5×20). Spring washer, flat washer and hex.
163+0.5 Overhead Mounting This method requires the optional kit FP03-10203. Name: Console mounting kit (Type: FP03-10203, Code no.: 001-011-710) Name Mounting plate Pan head screw Hex. nut Flat washer Spring washer 6 Fixing hole Contents of kit FP03-10203 Type Code No. 19-023-3091 100-316-260 M4 ×10 C2700W...
Page 13
1. Prepare four fixing holes in the bulkhead whose dimensions are as shown below. 120+0.5 2. Fasten four pan head screws (M4) to fix the mounting plate to the unit. 3. Insert four studs at the top of the mounting plate in fixing holes made at step 1, and then pass spring washers, flat washers and hex.
There are three types of connections: • Connection between one processor unit and memory card interface unit. • Connection between one memory card interface unit and multiple processor units • Connection between two memory card interface units and two processor units.
Connection between One Memory Card Interface Unit and Multiple Processor Units (Max. Three Units) Prepare the following cables and connectors: • Commercial LAN cable (CAT5, STC, straight) • Cable assy, MJ-A6SPF0014-010C/050C/100C/200C/300C (option for NavNet VX2) • Converter connector, MJA6SERMD/TM11AP8-005 (option for NavNet VX2) POWER F.G.
Connection between Two Memory Card Interface Units and Two Processor Units Prepare the following cables and connectors: • Commercial LAN cable (CAT5, STP, straight) • Cable assy, MJ-A6SPF0014-010C/050C/100C/200C/300C (option for NavNet VX2) • Converter connector, MJA6SERMD/TM11AP8-005 (option for NavNet VX2) POWER F.G.
Page 17
Setting of the IP address for the second memory card interface unit When connecting two memory card interface units, change the DIP switch setting on the second unit as below to change its IP address. Note that the second unit is exclusively for reading chart card.
You can store two SD cards here. Note 1: When the connection between NavNet VX2-BB and memory card interface unit is wrong, the NavNet VX2-BB searches for chart data in the SD card for 50 seconds, and then returns to the normal operation.
The numbers in the table refer to the corresponding units in the figure above. Unit NavNet VX2 NavNet VX2-BB NavNet VX2 NavNet VX2-BB Available chart card locations 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 CU-300 Available memory card location...
Page 20
The numbers in the table refer to the corresponding units in the figure above. Available chart card Unit (priority) locations 1 2 3 4 1 2 3 4 CU-300 CU-300* *: For the second CU-300, DIP switch setting is necessary. Available memory card location...
PACKING LIST CU-300-G5/G10[GENERAL用] N A M E ユニット UNIT メモリーカードインターフェイス MEMORY CARD INTERFACE UNIT 工事材料 INSTALLATION MATERIALS ケーブル組品MJ CABLE ASSY. ケーブル組品MJ CABLE ASSY. 工事材料 INSTALLATION MATERIALS 図書 DOCUMENT 取扱説明書 OPERATOR'S MANUAL (*1)は、仕様選択品を表します。 (*1)INDICATE SPECIFICATION SELECTIVE ITEM. 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT.
Page 23
工事材料表 INSTALLATION MATERIALS 番 号 名 称 NAME 六角ナット 一種 HEX.NUT ミガキ平座金 FLAT WASHER バネ座金 SPRING WASHER 寸切ボルト THREADED ROD 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりませ ん。 TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT.
Page 28
9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 : +81-(0)798-65-4200 Printed in Japan All rights reserved. Pub. No. OME-35501-A (HIMA ) CU-300 The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer A : MAY *00016540610* *00016540610*...