Maintenance, Troubleshooting; Preventive Maintenance - Furuno IF-NMEASC Operator's Manual

5. MAINTENANCE, TROUBLE-
SHOOTING
This chapter provides the information for keeping your unit in good working order.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
5.1

Preventive Maintenance

Regular maintenance is important for good performance. Following the procedures in the table be-
low will help maintain performance
Preventive maintenance
Item
Cabling Visually check cabling for
signs of wear and damage.
Ground Check ground wire.
Cover Cleanliness of cover.
Check point
NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to coating
or plastic parts of the equipment.
Those items contain organic solvents
that can damage coating and plastic
parts, especially plastic connectors.
Remedy
Replace damaged cables.
Check that ground wire is tightly fastened.
Check ground point for corrosion.
Dust can be removed with a soft cloth. Do not use
chemical based cleaners to clean the cover, as they
can remove paint and markings and deform the cov-
er.
10