Furuno MARINERADAR FR-8122 Installation Manual page 17

5. Fasten the shielded part of the signal cable with shield clamp (installation material) as
shown below.
6. Unfasten four screws to remove the RTB board cover.
7. Connect the plugs of the signal cable to the RTB board.
FR-8062, FR-8122: J821, J823, J824, J822
FR-8252:
8. Reattach the RTB board cover.
How to fix signal cable in cable gland
J821, J823, J824, J820
Connecting to the RTB board
Shield clamp
Signal cable
Fix shield wire with bolt.
Gasket support
Cable Entry
RTB board
J820
J823
J822
J824
J821
1. MOUNTING
1-9