Data Signal Port - Furuno 1835 Installation Manual

2.2

Data Signal Port

Connect external equipment(s) to the ports on the rear panel as shown below.
NMEA1 (7P), NMEA2 (7P)
(NMEA in / out)
GPS sensor, AIS
GPS navigator, echo sounder,
etc.
Necessary cable
MJ-A7SPF0007-050C
The Model 1835/1935/1945 can receive the following NMEA 0183 format sentence from other
equipment.
• Position
• Course true
• Course magnetic
• Speed over ground
• Speed related to water
• Distance to waypoint
• Destination waypoint, true
• Destination waypoint, magnetic BWR>BWC
• Heading (true)
• Heading (magnetic)
• Magnetic variation
• Cross-track error
• Depth
• Temperature
• Wind (true)
• Wind (relative)
• Time:
2-2
HDG (6P)
Heading sensor
(Example AD-100, SC-50, SC-
110)
Necessary cable
MJ-A6SPF0007-100C
1 + 2 -
3 GND
12-24 VDC/ 8.0-3.8A
GNS>GGA>RMC> GLL
VTG>RMC
VTG>RMC (true)
VTG>RMC
VHW
BWR>BWC>RMB
BWR>BWC>RMB
HDT>VHW (true)>HDG>HDM>VHW (magnetic)
HDG> HDM>VHW (magnetic)>HDT> VHW (true)
HDG>RMC
XTE>RMB
DPT>DBT
MTW
MWV>VWT
MWV>VWR
ZDA
External buzzer
Remote display
Necessary cable
See section 4.2.
DJ-1
USB
HDG
HDG port
NMEA1
NMEA1 port
NMEA2
NMEA2 port
OPTION
OPTION port
OPTION (10P)