Table of Contents
Advertisement
Table 8. System setup options—Display menu
Display
Primary Display
Video Primary Display
Brightness on battery power
Full Screen Logo
Full Screen Logo
Table 9. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth®
Enable UEFI Network Stack
Enable UEFI Network Stack
HTTP(s) Boot Feature
HTTP(s) Boot
HTTP(s) Boot Modes
Table 10. System setup options—Power menu
Power
USB Wake Support
Enable USB Wake Support
AC Behavior
62
System setup
Set or change the primary video controller when multi controllers are available
in the system.
By default, Auto is selected.
Sets the screen brightness when the computer is running on battery power.
Default: 50
Displays the full screen logo if the screen resolution matches the image of the
logo.
Default: OFF
Controls the onboard LAN controller.
By default, Enable with PXE is selected.
Enables or disables the internal WLAN device.
Default: ON
Enables or disables the internal Bluetooth® device.
Default: ON
Enable or disable UEFI Network Stack.
Default: ON
Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
Enables or disables HTTP(s) Boot Feature.
Default: ON
Configure the HTTP(s) Boot Mode. Auto Mode will extract Boot URL from
the Dynamic Host Configuration Protocol (DHCP). Manual mode reads user-
provided Boot URL.
By default, Auto Mode is selected.
Enables USB devices like a mouse or keyboard to wake the system from
Standby, Hibernation, or Power Off state.
Default: ON
Hide quick links:
Advertisement
Table of Contents
