Dell Inspiron 3910 Service Manual page 61

Table 6. System setup options—Integrated Devices menu (continued)
Integrated Devices
USB Configuration
Front USB Configuration
Rear USB Configuration
Table 7. System setup options—Storage menu
Storage
SATA Operation
SATA Operation
Storage Interface
Port Enablement
SMART Reporting
Drive Information
Enable MediaCard
Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, Enable Front USB Ports is selected.
By default, Enable Rear USB Ports is selected.
By default, Enable USB Boot Support is selected.
Enables or disables individual USB ports.
By default, Front Port 1 (Bottom Left)* is selected.
By default, Front Port 2 (Bottom Right)* is selected.
By default, Front Port 3 (Top Left) is selected.
By default, Front Port 5 (Top Right) is selected.
* Denotes a USB 3.0-capable port
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of this setting.
Enables or disables individual USB ports.
By default, Rear Port 1 (Top Left)* is selected.
By default, Rear Port 2 (Top Right)* is selected.
By default, Rear Port 3 (Bottom Left) is selected.
By default, Rear Port 5 (Bottom Right) is selected.
* Denotes a USB 3.0-capable port
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of this setting.
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID. (Intel® Rapid
Restore Technology)
Enables or disables the onboard drives.
Default: SATA-0 is ON
Default: SATA-1 is ON
Default: SATA-3 is ON
Default: M.2 PCIe SDD-0 is ON
Enable or disable SMART Reporting during system startup.
Default: OFF
Displays the information of various onboard drives.
Turn on or off all media cards, or enable or disable the media card in read-only
state.
By default, Secure Digital (SD) Card is selected.
System setup 61