Processor; Removing The Processor - Dell Inspiron 3910 Service Manual

The following image(s) indicate the location of the processor fan and heat-sink assembly and provides a visual representation of
the installation procedure.
Steps
1. Gently place the processor fan and heat-sink assembly on the processor.
2. Align the screw holes on the processor fan and heat-sink assembly with the screw holes on the system board.
3. In sequential order (1>2>3>4) tighten the four captive screws that secure the processor fan and heat-sink assembly to the
system board.
4. Connect the fan cable to the system board.
Next steps
1. Install the fan shroud.
2. Install the left-side cover.
3. Follow the procedure in

Processor

Removing the processor

Prerequisites
1. Follow the procedure in
2. Remove the left-side
3. Remove the fan shroud.
4. Remove the processor fan and heat-sink
46 Removing and installing components
After working inside your
Before working inside your
cover.
assembly.
computer.
computer.