Table of Contents
Advertisement
The following image(s) indicate the location of the hard drive and provides a visual representation of the installation procedure.
Steps
1. Connect the data cable and power cable to the hard drive.
2. Place the hard drive onto the chassis and align the screw holes of the hard drive with the screw holes of the chassis.
3. Replace the four screws (6-32) that secure the hard drive to the chassis.
4. Place the computer in an upright position.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
After working inside your
computer.
22
Removing and installing components
Hide quick links:
Advertisement
Table of Contents
