Remote Mode - Furuno 520 Operator's Manual

3. STEERING MODES
3.5

REMOTE Mode

Four types of optional remote controllers may be connected to the
NAVpilot-511/520. These are used to operate the Navpilot-511/520 from a
remote location.
Dial type remote controller (FAP-5551, 5552)
This remote controller can only be used when in the AUTO or NAV mode.
1. Turn on the remote controller switch to show "FU" (Follow-Up) on the control
unit. If the remote controller switch is turned on when in the STBY mode, a
beep sounds to alert you that remote mode is not available.
Course set
3-16
Turning power on (dial type)
FU mode
(Follow-up)
FU
359
RUDDER
40 20 10
Rudder angle (XTE or Deviation)
FU (Follow-Up) mode display (dial remote controller)
Heading mode
M: Magnetic
T: True
HDG
359.9
M
0
40
10 20
Heading from
heading sensor