Samsung RF31FM Series Manual page 234

https://appliancetechmanuals.com
6. Self Diagnosis & Trouble Shooting
6-20. Diagnosis for Sparkling system (Only for RF31FM*S*)
PROBLEM
Shooting Step 1
Nothing
coming
out when
pressing the All Valves
Sparkling operate normally.
Water
Dispenser
Lever
Trouble Trouble Shooting
Step 2
Check if the Sparkling
Water Production (②)
is off.
When connecting the
Water Hose properly
and pressing the Water
Lever, check if water
dispenses.
Check it at the Display
Function of Load
Condition Mode.
: It displays that the
Water Fill-Up is
detected (R-10-ⓔ).
→ Reproduce the
Sparkling Water without
water supply
Possible Causes
Turn on the Sparkling
Water Production by
pressing the Sparkling
When the Sparkling
Water button (③)on the
Water Production
Display Panel for 3
is set to OFF, it
seconds (resetting the
does not produce
CO2 Cylinder) or
additional Sparkling
pressing the
Water.
Cube/Crushed button (④)
for 3 seconds (Sparkling
ON/OFF).
When the Sparkling
Water Function Connect the Water Hose
operates, there is correctly at the back of
no Water Supply the Fridge.
but for the CO2.
Defective Housing Reconnect the Housings
(⑨,⑫) Connection (⑨,⑫)
Defective Display Replace the Display
Panel Panel
Defective Water
Replace the Module
Level Sensor
To do list
SOLUTION
234