Samsung RF31FM Series Manual page 125

https://appliancetechmanuals.com
4. Disassembly and Assembly
4-35. Assembling Procedures of the CO2 Cylinder and Precautions
Operational Notes
• Be sure to use genuine Soda Stream Cylinders from authorized resellers.
• The refrigerator starts making sparkling water about 10 seconds after you turn on the Sparkling Water
Production function.
• If you open the refrigerator door while the refrigerator is making sparkling water, it will stop. When you
close the door, it will resume making sparkling water in about a minute.
• If there is a power interruption when the refrigerator is making sparkling water, the refrigerator may re-
start the carbonation process when power returns and put too much carbonation into the water. If this
occurs, we recommend throwing out the overly carbonated water and starting the process again.
• If you keep dispensing sparkling water, the water stream may become unstable or break up. This is
caused by changes in pressure in the Sparkling Water Production Tank. It is not a defect.
• If the water hose is kinked or water is not supplied properly, the Carbonation Level of the Sparkling Water
will be high. This occurs because the the same amount of the carbon dioxide (CO2) is dispensed
by the Cylinder regardless of the amount of water in the Production Tank.
• The useful life of the Cylinder will vary, depending on the level of carbonation you select.
• If you are not going to be home for a long period of time, do not want to use the Sparkling Water function
any more, or you are moving:
1. Press the Cubed/Crushed button for three seconds to turn off the Sparkling Water function.
2. Empty the Sparkling Water tank by dispensing all the water in the tank.
3. Remove the CO2 Cylinder.
To do list
125