Samsung RF31FM Series Manual page 120

https://appliancetechmanuals.com
4. Disassembly and Assembly
4-35. Assembling Procedures of the CO2 Cylinder and Precautions
Notes
• If you open the refrigerator door while the refrigerator is making sparkling water, it will stop.
When you close the door, it will resume making sparkling water in about a minute.
• If you keep dispensing sparking water, the water stream may become unstable or breakup.
This is caused by changes in pressure in the Sparkling Water Production Tank. It is not a defect.
• If the water hose is kinked or water is not supplied properly, the Carbonation Level of the Sparkling Water
will be high. This occurs because the Same amount of carbon dioxide (CO2) is dispensed by the Cylinder
regardless of the amount of water in the Production Tank.
• If the Sparkling Water function is on and you dispense about 1.16 quarts (1.1 L) of sparkling water, the
refrigerator automatically begins making more sparkling water.
• If you are not going to be home for a long period of time, do not want to use the Sparkling Water function
any more, or you are moving:
1. Press the Cubed/Crushed button for three seconds to turn off the Sparkling Water function.
2. Empty the Sparkling Water tank by dispensing all the water in the tank.
3. Remove the CO2 Cylinder.
Function to Check the Remaining Quantity of CO2 in the Cylinder for Service Technicians :
To check how much CO2 is left in the Cylinder, press the Energy Saver button for 5 seconds with the Fridge
Door being open. Then, CO2 will be injected for a second.
This function can be used in all conditions; whether it is producing the Sparkling Water or not.
To do list
120