Samsung RF31FM Series Manual page 140

https://appliancetechmanuals.com
5. Check the installation status
5-1. Function for failure diagnosis
* R Load mode Check list
Display LED
R-1-ⓐ R-FAN High
R-1-ⓑ R-FAN Low
R-1-ⓒ R-DEF Heater
R-1-ⓓ START MODE
R-1-ⓔ Overload condition
R-1-ⓕ Low temperature condition When ambient temperature is less than 72℉(21°C), LED Blink
R-1-ⓔ,ⓕ
Normal Condition
(ALL LED Off)
R-1-ⓖ Exhibition Mode
F-1-ⓐ COMP.
F-1-ⓑ F-FAN High
F-1-ⓒ F-FAN Low
F-1-ⓓ F-DEF Heater
F-1-ⓔ C-FAN High
F-1-ⓕ C-FAN Low
F-1-ⓖ Sparkling Water To
Dispenser Valve
R-10-ⓐ Damper Open
R-10-ⓒ I-DEF HEATER (Ice Maker
HEATER)
R-10-ⓓ Full Ice
R-10-ⓔ Sparkling Water Tank Fill-
Up Detection
R-10-ⓕ Sparkling Water Tank Low
Detection
Display contents
When FF compartment FAN operates with high speed, applicable LED Blink
When FF compartment FAN operates with low speed, applicable LED Blink
When FF compartment defrost heater operates, LED Blink
When refrigerator is plugged initially, LED Blink
When ambient temperature is more than 93℉(35°C), LED Blink
When ambient temperature is between 73℉(22°C) and 91℉(34°C)
LED Blink at the display mode.
When COMP operates, applicable LED Blink
When FZ compartment FAN operates with high speed, applicable LED Blink
When FZ compartment FAN operates with low speed, applicable LED Blink
When FZ compartment defrost heater operates, LED Blink
When C-FAN operates with high speed, applicable LED Blink
When C-FAN operates with low speed, applicable LED Blink
When the Sparkling Water To Dispenser Valve operates LED Blink
When damper open, applicable LED Blink
When ice maker heater operates, LED Blink
When the Ice Maker's Bucket is full, applicable LED Blink
When water is detected by the Water Fill-Up Sensor in the Sparkling Water
Tank (Water is full), the LED blinks.
When water is detected by the Water Low Sensor in the Sparkling Water Tank
(Water is Low), the LED blinks.
Operation contents
To do list
Etc
Sparkling Model
Only
Sparkling Model
Only
Sparkling Model
140
Only