Set-Up Menu Options; Power Save Setting; Format - FujiFilm FinePix S3100 Owner's Manual

SET-UP

■ SET-UP menu options

Settings Display Factory default
IMAGE DISP. ON/OFF ON
POWER SAVE 2 MIN/5 MIN 2 MIN
1

FORMAT

OK –
§ BEEP LOW/HIGH/OFF LOW
DATE/TIME SET –
TIME
SET –
DIFFERENCE
FRAME NO. CONT./RENEW CONT.
2
¶/qWEB/®
USB MODE ¶
ENGLISH
VIDEO SYSTEM NTSC/PAL –
DISCHARGE OK –
3
qRESET OK –
60
Explanation
Specifies whether the preview images (the photographed
images) are displayed after taking a picture.
The image appears for a few moments and is then recorded.
Reduces the camera's power consumption and
subsequently turns the camera off when not being used.
Erases all files.
Sets the volume of the tone emitted when the camera
controls are used.
Corrects the date or time.
Specifies the time difference settings.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
¶ : DSC (Mass storage device) mode
This mode provides a simple way to read images from an
xD-Picture Card and store images onto an xD-Picture
Card.
q WEB: WEB Camera
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
✽ Windows XP SP1 only
® : PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a computer.
Specifies the language used for screen display.
Specifies whether video output is set to NTSC or PAL.
Discharges rechargeable batteries.
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press "c". To reset the camera
settings, press the "MENU/OK" button.

POWER SAVE SETTING

Page
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
–
１
ＩＭＡＧＥ ＩＭＡＧＥ ＤＩＳＰ．
ＰＯＷＥＲ ＰＯＷＥＲ ＳＡＶＥ
61
ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＢＥＥＰ ＢＥＥＰ
61
ＳＥＴ ＳＥＴ
–
13
62
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
63
is left unused for a set time (2 or 5 minutes).
77
76
73
◆
To restore power to the camera
–
0 1
–
87
–
FORMAT
ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？ ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
0 1
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
２ ３ turns off (sleep mode) and the indicator lamp blinks
：ＯＮ ：ＯＮ at 1-second intervals to save power. If the camera
ＤＩＳＰ．
ＳＡＶＥ ２ ＭＩＮ ＭＩＮ
remains unused for 2 or 5 minutes, it is turned off.
：ＯＫ ＯＫ
Use this function when you want to get the
：ＬＯＷ ：ＬＯＷ
maximum possible running time from your
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
batteries.
●
!
The Power save setting is disabled during automatic
playback, during rechargeable battery discharging and when
a USB connection is being used.
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
This is useful since the camera can be ready to
take pictures almost instantly.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
◆
When the Auto power off function has shut the
2 0
camera down (after 2 or 5 minutes):
1 Set the Power switch to "OFF".
2 Set the Power switch back to "
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
ＯＫ ＯＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 Press "d" or "c" to select "OK".
ＳＥＴ ＳＥＴ
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
0 2
Card.
●
!
If " ", "
7
-
"
before formatting the xD-Picture Card.
4
q w
" or " ".
", " " or
w 0
" appears, see P.89, 90 for information
61