FujiFilm Finepix S3100 Quick Start

S3100 S3100/
Power switch
Photography mode
Playback mode
Power-OFF
Shutter button
Self-timer lamp
Flash
Flash control
sensor
Lens
BL00405-100 ( 1 )
E
Picture Taking
A. Loading the batteries
0 1
1. Check that the camera is turned off (indicator lamp is off)
before opening the battery cover.
2. Load the batteries correctly as shown.
3. Press on the battery cover to push the batteries down.
Slide the cover closed.
B. Setting up the camera
1
Indicator
1. Align the indicators on the
xD-Picture Card slot and
xD-Picture Card and then
push the card firmly all the
way into the slot.
Close the slot cover.
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ ＭＭ ＤＤ ＹＹＹＹ ＭＭ ＤＤ
２００４ ２００ １ １ １ １
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
Press "d" or "c" to select the date order.
Mode dial
Manual
Scene position
AUTO
MOVIE (Video)
Flash pop-up button
xD-Picture Card slot
DC IN 5V (Power input)
VIDEO OUT (Video output) socket
2 0
2
1 0
0 2
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴ ＮＯＴ ＳＥＴ
ＳＥＴ ＳＥＴ ＮＯ ＮＯ
2. To turn the camera on, set
the Power switch to "
*A confirmation message
appears. Press
"MENU/OK" button to go to
DATE/TIME setting screen.
3. You can select
preferred date format.
Press "d" or "c" to select
the date order, Year, Month,
Day, Hour or Minute.
Press "a" or "b" to correct
the setting.
Press the "MENU/OK"
button after you complete
the setting.
*
Refer to owner's manual
for date/time setup.
S3500 S3500
Viewfinder (EVF)
EVF/LCD
(monitor selector)
button
Strap mount
Indicator lamp
Slot cover
LCD monitor
(USB) socket
Tripod mount
socket
Refer to Owner's Manual for more detailed instructions
C. Taking pictures
1
0 3
1. Set the Power
switch to "
3
Bebeep
3. Press the shutter
button
halfway to adjust
the focus.
D. Viewing pictures
q
".
the
your
Still images that can be viewed on the FinePix S3100/FinePix S3500
You can use this camera to view still images recorded on the FinePix
S3100/FinePix S3500 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.

Camera Controls

2
2. Press the "EVF/LCD" button to
q
". alternate the display between the
viewfinder (EVF) and the LCD monitor.
Press the "EVF/LCD" button to select
the viewfinder (EVF).
4
Beep
4. Press the shutter button down fully to
down take a picture. The camera makes a
"Beep" sound and takes the picture.
1. Set the Power switch to "
1 0
2. Press "c" to scan forward
through your images.
Press
backwards.
2 0
d/
Macro button
a/
T
(Tele zoom) button
c/
Flash button
b/
W
(Wide zoom)
button
Strap mount
MENU/OK button
DISP (Display)
/ BACK button
Low Light
Viewfinder button
Battery cover
w
".
"d " to scan
FGS-406106-Ni