ADJUSTING THE MONITOR BRIGHTNESS /
4
ADJUSTING THE VOLUME
Settings
1
1
0
2
0
2
1
0
2
0
3
0
1
2
0
N
N
SET – UP menu options
The options available in the "
" menu vary depending on whether the "
selected.
h "
" Still photography mode
h "
72
1 Set the Power switch to "
" or "
".
2 Press the "MENU/OK" button to display the
menu screen.
1 Press "d" or "c" to select "
" OPTION and
then press "a" or "b" to select "
EVF/LCD" or
"VOLUME".
2 Press the "MENU/OK" button.
1 Press "d " or "c " to adjust the monitor
brightness or the volume.
2 Press the "MENU/OK" button to confirm the new
setting.
", "
" or "
" Movie mode
h "
" Playback mode
SET – UP
I SET – UP menu options
Settings
IMAGE DISP.
POWER SAVE
FORMAT
BEEP
SHUTTER
DATE/TIME
FRAME NO.
USB MODE
CCD-RAW
VIDEO SYSTEM
DISCHARGE
RESET
USING THE SET – UP SCREEN
1
0
3
0
" mode is
0
4
Display
Factory default
Use this option to specify whether the preview images (the photographed
ON/OFF/PREVIEW
ON
image) is displayed after you take a shot. See P.74 for details.
Use this option to specify whether the camera's power consumption
2 MIN/5MIN/OFF
2 MIN
is reduced and the camera is subsequently switched off automatically
when it is not being used. See P.75 for details.
OK
–
Erases all files. See P.75 for details.
Sets the volume of the tone emitted when the camera controls are
OFF/1/2/3
2
used.
OFF/1/2/3
2
Sets the volume of the sound emitted when the shutter operates.
SET
–
Use this option to correct the date or time. See P.14 for details.
Specifies whether frame numbers are assigned consecutively from
CONT./RENEW
CONT.
previous numbers or begin again. See P.76 for details.
Selects whether "
" DSC mode or "
/
PC
when the camera is connected to a computer. See P.87 for details.
Sets the image quality to CCD-RAW. Because no image processing
OFF/ON
OFF
is performed on the camera for CCD-RAW images, they must be
processed on a computer.
ENGLISH
Use this setting to specify the language used for monitor display.
NTSC/PAL
–
Specifies whether video output is set to NTSC or PAL.
OK
–
Discharges rechargeable batteries. See P.99 for details.
Resets all the camera settings (other than the DATE/TIME, LANG.
and VIDEO SYSTEM) to the factory default values set at shipment.
OK
–
A confirmation message appears when you press "c". To reset the
camera settings, press the "MENU/OK" button again.
1 Press the "MENU/OK" button to display the
2
0
menu screen.
2 Press "d" or "c" to select "
then press "a" or "b" to select "SET – UP".
3 Press the "MENU/OK" button to display the
SET – UP screen.
4 Press "a" or "b" to select a menu option and
then press "d" or "c" to change the setting.
5 After you have modified the settings, press the
"MENU/OK" button to confirm the changes.
G
!
Always switch the camera off when replacing the batteries. If
5
0
you open the battery cover or disconnect the AC power
adapter without switching the camera off, the camera settings
may revert to the factory default values set at shipment.
G
!
Press "c" for "FORMAT", "DATE/TIME", "DISCHARGE",
"
RESET".
Explanation
PC" PC Camera mode is used
" OPTION and
73