Remote Control Unit - Fostex CR300 Owner's Manual

Fostex cr300 compact disc recorder owner's manual
Hide thumbs Also See for CR300:
Table of Contents

Advertisement

CONTROLS AND INDICATORS

REMOTE CONTROL UNIT

Wireless remote control
FADER button
PEPEAT button
Numeric buttons
(1 to 10, >10)
Program button
(PGM)
Program check button
(CHECK)
Parallel remote control
The CR300 can be controlled through the rear panel
parallel remote control input connector and also with
the wireless remote controller included with the
CR300.
DIN 8 pin connector
The CR300 can be controlled with external switches by
utilizing the circuit shown below.
14
CR300 <PRB1291-B>
MODEL 8317
REC
TRACK NO.
FADER
WREITE
REPEAT
1
2
3
4
5
6
7
8
9
10
10
TIME
PGM
CHECK
CLEAR
PARALLEL
REMOTE
7
6
3
1
8
5
4
2
Not Use
Operations performed by buttons marked " " can
also be carried out by using buttons with the same
name on the main unit (See page 12).
Record buttons
(REC)
NOTE:
For recording,
press the 2 buttons simultaneously
Manual TRACK NO.
WRITE button
Record muting button
Manual search button
Track search button
Stop button
Pause button
Play button
Time button
(TIME)
Program clear button
(CLEAR)
Remote controllable range
Caution on the remote control operation
• Remote control might not work if there is an obstacle
between the remote control unit and the CR300 or if the
remote control unit is operated at too great of an angle
from the remote control sensor.
• Erroneous operation may occur in strong light such as
direct sunlight or fluorescent lamp light shining into the
remote control sensor.
• The CR300 may operate erroneously if it is used near
equipment radiating infrared rays or if the infrared remote
control unit of other equipment is used near the CR300.
On the contrary, if this remote control unit is operated
near another piece of equipment which can be controlled
with infrared rays, that equipment might not work
correctly.
• Replace batteries when the remote controllable range
decreases noticeably.
Acceptance of commands from
the wireless remote controller
by the CR300 can be set using
the MENU button function.
(See page 24)
Remote control sensor
Point the remote control
unit and press its buttons.
30
30
7m(23 ft)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents