Fluke 6200-2 User Manual page 11

Appliance tester
Table of Contents

Advertisement

Do not apply more than the rated voltage, between the terminals or
between each terminal and earth ground.
Limit operation to the specified measurement category, voltage, or
amperage ratings.
Measure a known voltage first to make sure that the Product
operates correctly.
Use only current probes, test leads, and adapters supplied with the
Product.
Do not use a current measurement as an indication that a circuit is
safe to touch. A voltage measurement is necessary to know if a
circuit is hazardous.
Keep fingers behind the finger guards on the probes.
The Product shall not be used for measurements in electrical
installations.
When conducting tests, do not touch the appliance as some tests
involve high voltages and high currents.
Never open the Product's case because dangerous voltages are
present. There are no user-replaceable parts in the Product.
The Product has been set for a nominal 240 V ac, 50 Hz operation, it
must never be connected to a higher voltage.
The Product may only be connected to a correctly wired mains
socket protected for a maximum current rating of 10 A (AU), 13 A
(UK), or 16 A (DE, NL).
The mains supply is never to be connected to the IEC lead test
connector or to the appliance test connector.
If the Product continuously emits a two-tone sound, you should
unplug it immediately as this indicates a dangerous condition.
Table 2 is a list of symbols used on the Product or in this manual.
Symbol
Risk of danger. Important information. See manual.
Hazardous voltage. Risk of electric shock.
Conforms to requirements of European Union and European Free Trade Association.
VDE Association for Electrical, Electronic & Information Technologies.
Double Insulated (Class II) Equipment
Earth Ground
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation product. Do not dispose of this product as unsorted municipal waste. Go to
Fluke's website for recycling information.
Table 2. Symbols
Description
Appliance Tester
Safety Information
3

Advertisement

Table of Contents
loading

Table of Contents