Intel Celeron 847 Technical Manual page 35

LVDS1 Panel Color Depth
The optional settings are: [18 Bit]; [24 Bit].
► North PCIe Configuration
Press [Enter] to make settings for the following sub-items:
NB PCIe Configuration:
PEG-Gen X
The optional settings are: [Auto]; [Gen1]; [Gen2].
PEG ASPM
Use this item to control ASPM support for the PEG. This has no effect if PEG is not
the currently active device.
The optional settings are: [Disabled]; [Auto]; [ASPM L0s]; [ASPM L1]; [ASPM
L0sL1].
Enable PEG
The optional settings are: [Disabled]; [Enabled]; [Auto].
Detect Non-Compliance Device
Use this item to detect non-compliance PCI Express device in PEG.
The optional settings are: [Disabled]; [Enabled].
De-emphasis Control
Use this item to configure the De-emphasis control on PEG.
The optional settings are: [-6 dB]; [-3.5 dB].
► Memory Configuration
Press [Enter] to make settings for the following sub-items:
DIMM profile
Use this item to select DIMM timing profile that should be used.
The optional settings are: [Default DIMM profile]; [Custom Profile].
When set as [Custom Profile], the sub-item 'Custom Profile Control' will appear
for user to manually set memory timing configuration.
Memory Frequency Limiter
Use this item to set maximum memory frequency selection in Mhz. This item will
not show on the screen when 'DIMM Profile' is set as: [Custom Profile].
The optional settings are [Auto]; [1067]; [1333].
MMode Support
The optional settings are: [Auto]; [1N Mode]; [2N Mode].
30