Intel 1037U Technical Manual
  1. Manuals
  2. Brands
  3. Intel Manuals
  4. Motherboard
  5. 1037U
  6. Technical manual
Intel 1037U Technical Manual

Intel 1037U Technical Manual

Cpu + intel nm70 chipset based mini-itx m/b
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TECHNICAL MANUAL
Of
Intel 1037U CPU + Intel NM70 Chipset
Based Mini-ITX M/B
NO. G03-NL70IE1037-F
Revision: 3.0
Release date: May 8, 2014
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for Intel 1037U

Summary of Contents for Intel 1037U

  • Page 1 TECHNICAL MANUAL Intel 1037U CPU + Intel NM70 Chipset Based Mini-ITX M/B NO. G03-NL70IE1037-F Revision: 3.0 Release date: May 8, 2014 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
  • Page 2 Environmental Protection Announcement Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.

  • Page 3: Table Of Contents

    TABLE OF CONTENT ENVIRONMENTAL SAFETY INSTRUCTION ................iii USER’S NOTICE ........................iv MANUAL REVISION INFORMATION ..................iv ITEM CHECKLIST ........................iv CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD FEATURE OF MOTHERBOARD ................1 SPECIFICATION ......................2 LAYOUT DIAGRAM ....................3 CHAPTER 2 HARDWARE INSTALLATION JUMPER SETTING .....................

  • Page 4: Environmental Safety Instruction

    Environmental Safety Instruction  Avoid the dusty, humidity and temperature extremes. Do not place the product in any area where it may become wet.  0 to 60 centigrade is the suitable temperature. (The figure comes from the request of the main chipset) ...

  • Page 5: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

  • Page 6: Chapter 1 Introduction Of The Motherboard Feature Of Motherboard

    Introduction of the Motherboard Feature of Motherboard ® ®  Intel 1037U dual-core CPU+ Intel NM70 express chipset  Support 1 * DDRIII slot for SO-DIMM 1066/1333 MHz up to 8GB  Support 2 * SATAII (3Gb/s) Devices  Support half-size Mini-PCIE connector ...

  • Page 7: Specification

    Description Design  6-layer PCB size: 16.8 x 12.0 cm ®  Intel Embedded CPU 1037U Dual Core CPU (1.8GHz) ®  Intel NM70 Express Chipset Chipset  1* DDRIII SO-DIMM slot to support DDRIII 1066/1333 MHz DDRIII SO-DIMM expandable to 8GB Memory ...

  • Page 8: Layout Diagram

     5* COM header  1* TX-RXCOM header  1 * Parallel header  1 *GPIO header  1 *12-pin VGA header  1 *20-pin HDMI header  1 *24-bit Dual Channel LVDS header  1* LVDS inverter header  JP3: 1*LVDS panel brightness adjustment header ...
  • Page 9 * DRAM 2G Onboard SODIMM Slot (Optional for NL70-IE1037-2G) HDMI Header VGA Port VGA Header SYSFAN1 Header USB 2.0 Ports Intel NM70 Chipset GPIO Header LVDS Header M-SATA Connector LVDS Inverter RJ-45 LAN Port Parallel Port Header CPUFAN1 Header USB 2.0 Header...
  • Page 10 The other diagrams used for illustration in this manual are from model NL70-IE1037, unless otherwise stated. Motherboard Internal Diagram--Back SIM Card Slot...
  • Page 11 Motherboard Jumper Position JCOMP1 JCOM1 AT_MODE1 JBAT JCOMP2 JCOMP3...
  • Page 12 Jumper Jumper Name Description JBAT CMOS RAM Clear Function Setting 3-pin Block INVERTER1 VCC 3.3V/5V/12V Select 4-pin Block LVDS1 VCC 3.3V/5V/12V Select 4-pin Block JCOMP3 COM3 Header Pin9 Function Select 4-Pin Block JCOMP2 COM2 Header Pin9 Function Select 4-Pin Block JCOMP1 COM1 Header Pin9 Function Select 4-Pin Block...
  • Page 13 Headers Header Name Description JW_FP1 Front Panel Header(PWR LED/ HD 8-pin Block LED/Power Button /Reset) USB2/USB3 USB 2.0 Port Header 9-pin Block COM2/3/4/5/6 Serial Port Header 9-pin Block TX_RXCOM1 TX_RXCOM1 Header PARALLEL1 Parallel Port Header 25-pin Block GPIO1 GPIO Header 10-pin block VGA1 VGA Header...

  • Page 14: Chapter 2 Hardware Installation

    Chapter 2 Hardware Installation 2-1 Jumper Setting (1) JBAT (3-pin): CMOS RAM Clear Function Setting JBAT 1-2 Closed： Normal； 2-3 Closed：Clear CMOS CMOS Clear Setting (2) JP1 (4-pin): INVERTER1 VCC 3.3V/5V /12V Select 6 4 2 6 4 2 2-4 Closed: 3-4 Closed: 4-6 Closed: Inverter Backlight...
  • Page 15 (3) JP2 (4-pin): LVDS1 VCC 3.3V/5V/12V Select 6 4 2 6 4 2 2-4 Closed: LVDS1 3-4 Closed: LVDS1 4-6 Closed: LVDS1 VCC= 3.3V; VCC= 5V; VCC= 12V. (4) JCOMP3 (6-pin): COM3 Header Pin9 Function Select JCOMP3→COM3 Header 2 4 6 2 4 6 1 3 5 1 3 5...
  • Page 16 (4) JCOMP2 (6-pin): COM2 Header Pin9 Function Select JCOMP2→COM2 Header 2 4 6 2 4 6 1 3 5 1 3 5 2-4 Closed: 3-4 Closed: 4-6 Closed: RI=RS232; RI= 5V; RI= 12V. (5) JCOMP1 (6-pin): COM1 Port Pin9 Function Select JCOMP1→COM1 Port 2-4 Closed: 3-4 Closed:...
  • Page 17 (6) JCOM1 (6-pin): COM1 Port RS232/RS485/RS422 Function Select JCOM1→COM1 Port 1-2 Closed: RS232; 3-4 Closed : RS485; 5-6 Closed : RS422. (7)AT_MODE1 (2-pin): AT Mode Function Select AT_MODE1 1-2 Open： Normal; 1-2 Short： AT_Mode Select. Pin 1-2 closed: AT_MODE function is enabled. In this case your computer will automatically turns on after a sudden power failure when power supply resumes.

  • Page 18: Connectors And Headers

    Connectors and Headers 2-2-1 Connectors (1) Rear IO Diagram Connectors RJ-45 LAN Port USB 2.0 Ports VGA Port COM1 Port Line-Out Port RJ-45 LAN Port (2) DCIN1 (4-pin block):10V~24V Power Connector Pin1 Pin No. Definition +10V~+24V +10V~+24V...
  • Page 19 (3) SATA1/SATA2:SATAII Port connector This connector is a high-speed SATAII port that supports 3 GB/s transfer rate. Pin No. Defnition (4) PWOUT1(4-pin): SATA Hard Disk Power-out Connector Pin 1...

  • Page 20: Headers

    2-2-2 Headers (1) JW-FP1 (9-pin): Front Panel Header Pin 1 (2) USB2/USB3 (9-pin): USB 2.0 Port Header Pin 1...
  • Page 21 (3) COM2/3/4/5/6 (9-Pin): Serial Port Headers Pin6 Pin1 Pin1 Pin6 COM2/3 COM4/5/6 (4) TX_RXCOM1(4-Pin): RS422/485 Header Pin 1...
  • Page 22 (5) PARALLEL1 (25-pin): Parallel Port Header Pin 14 Pin1 Pin NO. Pin Definition Pin NO. Pin Definition STB- AFD- Pin 1 Pin 14 PRD0 ERR- Pin 2 Pin 15 PRD1 INIT- Pin 3 Pin 16 PRD2 SLIN- Pin 4 Pin 17 PRD3 Pin 5 Pin 18...
  • Page 23 (6) GPIO1 (10-pin): GPIO Header G PIO _71 GPIO_70 GPIO_68 GPIO _69 GPIO_38 GPIO _39 GPIO _34 GPIO_57 Pin 1 (7) VGA1 (12-pin): VGA Header Pin No. Definition VCC5(Reserved) VGA_VSYNC VGA_HSYNC GND_RED RED_VGA GND_GRN GRN_VGA Pin 1 GND_BLUE BLUE_VGA DDC_DATA DDC_CLK...
  • Page 24 (8) HDMI1 (20-pin): HDMI Header Pin1 Pin 2 HDMI1 Header Pin NO. Pin Definition Pin NO. Pin Definition HDMI_TXP2 Pin 1 Pin 2 HDMI_TXP1 HDMI_TXN2 Pin 3 Pin 4 Pin 5 HDMI_TXN1 Pin 6 HDMI_TXP0 Pin 7 Pin 8 Pin 9 HDMI_TXCP Pin 10 HDMI_TXN0...
  • Page 25 (9) LVDS1 (30-Pin): 24-bit dual channel LVDS Header Pin2 Pin 1 LVDS1 Header Pin NO. Pin Define Pin NO. Pin Define Pin 1 LVDS_VCC Pin 2 LVDS_VCC Pin 3 LVDS_VCC Pin 4 Pin 5 Pin 6 Pin 7 LVDSA_DATAN0 Pin 8 LVDSA_DATAP0 Pin 9 LVDSA_DATAN1...
  • Page 26 (10) INVERTER1 (6-Pin): LVDS1 Inverter Header Pin 1 Pin No. Definition BKLT_PWR1 BKLT_PWR2 BKLT_EN BKLT_PWM GND1 GND2 (11) JP3 (2-pin): LVDS Panel Brightness Adjustment Header Pin1...
  • Page 27 (12) SPEAKER_CON (4-pin): Speaker Header Pin1 (13) CPUFAN1 (4-pin): CPUFAN Header Pin1 CPUFAN1...
  • Page 28 (14) SYSFAN1/SYSFAN3 (3-pin): FAN Headers Pin1 SYSFAN3 Fan Speed SYSFAN1 +12V Fan Power Pin1...

  • Page 29: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS Notice! The BIOS options in this manual are for reference only. Different configurations may lead to difference in BIOS screen and BIOS screens in manuals are usually the first BIOS version when the board is released and may be different from your purchased motherboard. Users are welcome to download the latest BIOS version form our official website.

  • Page 30: Bios Menu Screen

    BIOS Menu Screen The following diagram show a general BIOS menu screen: Menu Bar General Help Items Current Setting Value Menu Items Function Keys BIOS Menu Screen Function Keys In the above BIOS Setup main menu of, you can see several options. We will explain these options step by step in the following pages of this chapter, but let us first see a short description of the function keys you may use here: ...

  • Page 31: Getting Help

     Press <Enter> to select.  Press <+>/<–> keys when you want to modify the BIOS parameters for the active option.  [F1]: General help.  [F2]: Previous value.  [F3]: Optimized defaults.  [F4]: Save & Exit.  [F10]: Save & Reset. ...

  • Page 32: Main Menu

    Main Menu Main menu screen includes some basic system information. Highlight the item and then use the <+> or <-> and numerical keyboard keys to select the value you want in each item. System Date Set the date. Please use [Tab] to switch between data elements. System Time Set the time.

  • Page 33: Advanced Menu

    3-7 Advanced Menu  ACPI Settings Press [Enter] to make settings for the following sub-items: ACPI Settings Enable Hibernation The optional settings: [Enabled]; [Disabled]. Use this item to enable or disable system ability to hibernate (OS/S4 Sleep State). This option may not be effective with some OS. ACPI Sleep State Use this item to select the highest ACPI sleep state the system will enter when the suspend button is pressed.
  • Page 34 EUP Support The optional settings: [Enabled]; [Disabled]. Use this item to enable or disable EUP function for this board. This item should be set as [Disabled] if you wish to have active all Wake-up functions. Wake-Up by PCIE/LAN from S5 The optional settings: [Enabled];...
  • Page 35 For SATA device support Legacy OS (Like Dos), Please select [Legacy] for compatible.  Acoustic Management Configuration Press [Enter] to go to enable or disable ‘Automatic Acoustic Management’.  ME Configuration Press [Enter] to go to ME FW Image Re-Flash to enable or disable ME FW Image Re-Flash function.
  • Page 36 RS232 or RS485 Select The optional settings are: [RS232]; [RS485].  Serial Port 2 Configuration/Serial Port 3 Configuration / Serial Port 4 Configuration Press [Enter] to make settings for the following items: Serial Port Use this item to enable or disable serial port (COM). Change Settings Use this item to select an optimal setting for super IO device.
  • Page 37 [75C/167F]. CPUFAN1 Smart Mode Press [Enter] to make settings for Smart Fan Configuration: The optional settings are: [Disabled]; [Enabled]. When set as [Enabled], the following sub-items shall appear: FAN Off Temperature Limit Use this item to select a value at which the fan will be off when the temperature is lower than this limit.

  • Page 38: Chipset Menu

    3-8 Chipset Menu  South Bridge Configuration Press [Enter] to make settings for the following sub-items: Onboard PCIE LAN2 Use this item to control the onboard PCIE LAN2 root port. The optional settings are: [Disabled]; [Enabled]. MINI_CARD Use this item to control the MINI_CARD. The optional settings are: [Disabled];...
  • Page 39 Onboard PCIE LAN1 Use this item to control the onboard PCIE LAN1 root port. The optional settings are: [Disabled]; [Enabled]. Onboard Lan BootROM Use this item to enable or disable boot option ROM for onboard network devices. The optional settings are: [Disabled]; [Enabled]. PCIE Sub Decode Use this item to enable or disable PCI Express subtractive decode.
  • Page 40  North Bridge Configuration Press [Enter] to make settings for the following sub-items: DMI Gen 2 The optional settings are: [Auto]; [Enabled]; [Disabled]. VT-D The optional settings are: [Enabled]; [Disabled]. *This item might not be available depending on configuration. IGD Memory Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the internal graphics device.

  • Page 41: Boot Menu

    Backlight Control The optional settings are: [PWM Inverted]; [PWM Normal]. 3-9 Boot Menu Boot Configuration Setup Prompt Timeout Use this item to set number of seconds to wait for setup activation key. Bootup Numlock State Use this item to select keyboard numlock state. The optional settings are: [On];...
  • Page 42 The optional settings are: [Auto]; [EFI Driver]. *When set as [Enabled], it will only install Legacy OpROM with Legacy OS and logo will not be shown during POST. EFI driver will still be installed with EFI OS. USB Support The optional settings are: [Disabled]; [Full Initial]; [Partial Initial]. PS2 Device Support The optional settings are: [Disabled];...

  • Page 43: Security Menu

    3-10 Security Menu Administrator Password This item allows user to set administrator password. User Password This item allows user to set user password.

  • Page 44: Turbooc Menu

    Use this item to set the number of cores to enable in each processor packages. Intel Virtualization Technology The optional settings: [Enabled]; [Disabled]. When set as [Enabled], a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Enhanced Intel SpeedStep Technology The optional settings are: [Disabled]; [Enabled].
  • Page 45 CPU C1E Report The optional settings are: [Disabled]; [Enabled]. Use this item to enable or disable CPU C1E report to OS. CPU C3 Report The optional settings are: [Disabled]; [Enabled]. Use this item to enable or disable CPU C3 (ACPI C2) report to OS. CPU C6 Report The optional settings are: [Disabled];...

  • Page 46: Save & Exit Menu

    tRRD The setting range for ‘Min Ras Active to ROW Active Delay’ is from [1] to [38]. tWTR The setting range for ‘Internal Write to Read Command Delay Time’ is from [1] to [38]. tRTP The setting range for ‘Internal Read to Precharge Command Delay Time’ is from [1] to [38].
  • Page 47 Save Changes and Exit This item allows user to exit the system after saving the changes. Discard Changes and Exit This item allows user to exit the system without saving any changes. Save Changes and Reset This item allows user to reset the system after saving the changes. Discard Changes and Reset This item allows user to reset the system without saving any changes.

This manual is also suitable for:

Nm70

Table of Contents