Using Enhanced Override - Nortel 1150E User Manual

Additional Call Features

Using Enhanced Override

Enhanced Override
attempted a Forced Camp-on. Use Enhanced Override when you make
either a simple call or a consultation call (i.e., place a call on hold and call
another party).
To use Enhanced Override:
Override
Override
To end the connection:
100
allows you to override an active call after you have
1. Dial a phone number and receive a busy
signal.
2. Press the
Override FFC to initiate a Forced Camp-
on. If either of the persons on the call
disconnects at this time, you receive an
overflow (fast busy/engaged) signal.
3. Press the
the Override FFC again. The other two
persons on the call receive an override
tone and a conference call is established
between the three of you. If anyone
disconnects, the other two persons will
remain connected.
1. Press the
Override Key or enter the
Override Key again or enter
Goodbye key.