Lubrication - Ferris 5000/61RCE Operator's Manual

Regular Maintenance

LUBRICATION

Lubricate the unit at the locations shown in Figure 19
through 24.
Grease:
Use grease fittings when present. Disassemble parts
to apply grease to moving parts when grease fittings
are not installed.
Not all greases are compatible. Ferris Red Grease
(P/N 22285) is recommended, automotive-type high-
temperature, lithium grease may be used when this is
not available.
Oil:
Generally, all moving metal parts should be oiled
where contact is made with other parts. Keep oil and
grease off belts and pulleys. Remember to wipe fit-
tings and surfaces clean both before and after lubri-
cation.
Figure 19. Deck Lift Pedal & Pivots
Figure 20. Deck Lift Linkage Pivots
Figure 21. Deck Lubrication
22