Zoom F8n Pro Operation Manual page 89

HINT:
• "Ambisonic Mode" can be set during use as an audio interface (Multi Track).
(Audio Interface))
• Even when "Ambisonic Mode" is not set to "Off", you can press track
When "PFL mode" is set to "PFL", you can monitor sounds before they are converted to ambisonics
B-format. When "PFL mode" is set to "SOLO", you can monitor sounds after they are converted to
ambisonics B-format.
input signals of specific tracks
• The input enabled/disabled statuses of the "Ambisonic Mode" input tracks are linked, so the settings of all
assigned tracks can be switched simultaneously by pressing any of their track keys.
• The following parameters that can be set on the PFL screen are linked for input tracks using "Ambisonic
(→PFL
Mode". Screen)
"HPF"/"Input Limiter"/"Phantom"/"Fader"/"PFL Mode"/"Input Source"/"Input Level"
• When"Ambisonic Mode" is not set to "Off", The Home Screen is displayed as follows. (The display is
changed depending on the "Track Knob Option" setting.
Option))
■When "Track Knob
Option" is set to "Trim"
❶
Track 1-4 fader
❷
Format name
❸
Pan disable
(→Setting the monitoring sound on the PFL Screen (PFL
(PFL/SOLO))
■When "Track Knob
Option" is set to "Fader"
(→Setting the track knob function (Track Knob
■When "Track Knob
Option" is set to "Mixer"
89
(→Using as an audio interface
to monitor their input sounds.
Mode), Monitoring the