Zoom F8n Pro Operation Manual page 88

NOTE:
• The sampling rate can only be set to 192 kHz when the format of "Ambisonic Mode" is "Off".
sampling rate (Sample
• Ambisonic files are saved as 4-channel polyphonic files, not as mono or stereo files.
• A ZOOM mic capsule can only be used when the format of "Ambisonic Mode" is "Off".
• The following parameters cannot be set for tracks using "Ambisonic Mode" input.
"Pan"/"Phase Invert"/"Side Mic Level"/"Input Delay"/"Stereo Link"/"Stereo Link Mode"/"Trim Link"
• Files recorded when the format of "Ambisonic Mode" is not "Off" will play back as ambisonic audio
sources rather than ordinary 4-channel polyphonic files. For this reason, these tracks cannot the panned
or muted during playback.
• When the sampling rate is set to 44.1–48.048 kHz and "Ambisonic Mode" is not set to "Off", the F8n Pro
latency will increase 2 ms. When monitoring sounds being recorded with a mic in real-time, increased
latency can cause interference between sound transmitted through the air from the source and the
delayed monitored sound, possibly making accurate monitoring of the sounds difficult.
sampling rate (Sample
• This cannot be used with the "Auto Mix" function.
Rate))
Rate))
(→Changing the automatic mixing setting (Auto Mix)
88
(→Setting the
(→Setting the
)