Setting the keys held (Key Hold Target)
Use the hold function to prevent misoperation during recording. Press
Follow these instructions to set which keys are disabled by the hold function.
1.
Press
.
This opens the Menu Screen.
2.
Use
to select "SYSTEM", and press
3.
Use
to select "Key Hold Target", and press
4.
Use
to select the keys held, and press
HINT:
You can select "Track 1-8", "PFL 1-8", "Trim Knob 1–8", "Slate Mic", "Slate Tone", "Encoder", "MENU", "HP
Volume", "REW", "STOP", "FF", "PLAY" and "REC".
.
.
.
276
+
to turn it on/off.