Tips For Missing Running Dynamics Data; Inreach Remote; Using The Inreach Remote; Virb Remote - Garmin DESCENT G1 Series Owner's Manual

Tips for Missing Running Dynamics Data

If running dynamics data does not appear, you can try these tips.
• Make sure you have a running dynamics accessory, such as the HRM-Pro accessory.
Accessories with running dynamics have
• Pair the running dynamics accessory with your Descent device again, according to the instructions.
• If you are using the HRM-Pro accessory, pair it with your Descent device using ANT+ technology, rather than
Bluetooth technology.
• If the running dynamics data display shows only zeros, make sure the accessory is worn right-side up.
NOTE: Ground contact time and balance appears only while running. It is not calculated while walking.

inReach Remote

The inReach remote function allows you to control your inReach device using your Descent device. Go to
buy.garmin.com to purchase a compatible inReach device.

Using the inReach Remote

Before you can use the inReach remote function, you must add the inReach glance to the glance loop
(Customizing the Glance Loop, page
1 Turn on the inReach device.
2 On your Descent watch, press UP or DOWN from the watch face to view the inReach glance.
3 Press START to search for your inReach device.
4 Press START to pair your inReach device.
5 Press START, and select an option:
• To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a real emergency situation.
• To send a text message, select Messages > New Message, select the message contacts, and enter the
message text or select a quick text option.
• To send a preset message, select Send Preset, and select a message from the list.
• To view the timer and distance traveled during an activity, select Tracking.

VIRB Remote

The VIRB remote function allows you to control your VIRB action camera using your device.
72
on the front of the module.
52).
Sensors and Accessories