Getting Your Ftp Estimate; Lactate Threshold - Garmin DESCENT G1 Series Owner's Manual

Getting Your FTP Estimate

Before you can get your functional threshold power (FTP) estimate, you must pair a chest heart rate monitor
and power meter with your watch
estimate (Getting Your VO2 Max. Estimate for Cycling, page
The watch uses your user profile information from the initial setup and your VO2 max. estimate to estimate your
FTP. The watch automatically detects your FTP during rides at a steady, high intensity with heart rate and
power.
1 Press UP or DOWN to view the performance glance.
2 Press START to view the glance details.
3 Press UP or DOWN to view your FTP estimate.
Your FTP estimate appears as a value measured in watts per kilogram, your power output in watts, and a
position on the gauge.
For more information, see the appendix
NOTE: When a performance notification alerts you to a new FTP, you can select Accept to save the new FTP,
or Decline to keep your current FTP.
Conducting an FTP Test
Before you can conduct a test to determine your functional threshold power (FTP), you must pair a chest heart
rate monitor and a power meter with your device
your VO2 max. estimate
NOTE: The FTP test is a challenging workout that takes about 30 minutes to complete. Choose a practical and
mostly flat route that allows you to ride at a steadily increasing effort, similar to a time trial.
1 From the watch face, select START.
2 Select a cycling activity.
3 Hold MENU.
4 Select Training > FTP Guided Test.
5 Follow the on-screen instructions.
After you begin your ride, the device displays each step duration, the target, and current power data. A
message appears when the test is complete.
6 After you complete the guided test, complete the cool down, stop the timer, and save the activity.
Your FTP appears as a value measured in watts per kilogram, your power output in watts, and a position on
the color gauge.
7 Select an option:
• Select Accept to save the new FTP.
• Select Decline to keep your current FTP.

Lactate Threshold

Lactate threshold is the exercise intensity at which lactate (lactic acid) starts to accumulate in the bloodstream.
In running, it is the estimated level of effort or pace. When a runner exceeds the threshold, fatigue starts to
increase at an accelerating rate. For experienced runners, the threshold occurs at approximately 90% of their
maximum heart rate and between 10k and half-marathon race pace. For average runners, the lactate threshold
often occurs well below 90% of maximum heart rate. Knowing your lactate threshold can help you determine
how hard to train or when to push yourself during a race.
If you already know your lactate threshold heart rate value, you can enter it in your user profile settings
Your Heart Rate Zones, page
lactate threshold during an activity.
Appearance
(Pairing Your Wireless Sensors, page
(FTP Ratings, page
(Pairing Your Wireless Sensors, page
(Getting Your VO2 Max. Estimate for Cycling, page
80). You can turn on the Auto Detection feature to automatically record your
71), and you must get your VO2 max.
54).
117).
54).
71), and you must get
(Setting
55