Additional Installation Requirements - FWE COLD-TEMP URS-10 Operating Instructions Manual

FWE
REFRIGERATED "COLD-TEMP" SERIES
INSTALLATION
ELECTRICAL REQUIREMENTS AND GROUNDING
FWE "Cold-Temp" models operate on 120 VAC, 60 Hz, 1 ph, and
are equipped with a grounded NEMA Plug for your protection against
possible shock hazards. Be sure to plug only into a properly grounded
three prong wall receptacle. If you have any questions with regard to
adequate wiring or grounding in your building, a qualified electrician
should be contacted before using your cabinet. The electrical specs of
your cabinet are printed on the serial tag attached to the unit.

ADDITIONAL INSTALLATION REQUIREMENTS

• Minimum 6" clearance around cabinet
• Unit should be installed on a level surface
• Unit should not
environmental conditions are present
4
FWE Operating Instructions | Refrigerated "Cold-Temp" Series
be installed in an area where adverse