Command/Response Table For Sis Commands - Extron electronics PoleVault PVS 204SA User Manual

Command/response table for SIS commands

Command
Input selection
Select an input (video and audio)
Example:
Select an input (video and audio)
Example:
Select an audio input
Select a video input (single sw. mode)
Select a video input (sep sw. mode)
Audio gain/attenuation (per input)
N The set gain (G) and attenuation (g) are case sensitive.
Set a specific input's gain.
Example:
Set a specific input's attenuation
Example:
N Aux/Mix input is input 7.
Increment a specific input's gain
Decrement a specific input's gain
View a specific input's gain
Set the current input's gain
Set the current input's attenuation
Increment the current input's gain
Decrement the current input's gain
View the current input's audio gain
Audio treble adjustment (applies to inputs 1-4)
N Treble and bass are strictly global commands. They will only adjust twisted pair audio signals, not Aux/Mix signals.
Set the treble level
Example:
Increment the treble level
Decrement the treble level
View the treble level
Audio bass adjustment (applies to inputs 1-4)
N Treble and bass are strictly global commands. They will adjust only twisted pair audio signals, not Aux/Mix signals.
Set the bass level
Example:
Increment the bass level
Decrement the bass level
View the bass level
Audio mute
Mute on
Mute off
View the audio mute status
ASCII Command Response
(host to switcher) (switcher to host)
X! ! Chn X! ] (single sw. mode)
2! Chn2 ] (single sw. mode)
X! * X1% ! Chn X1% * X! ! ] (sep. sw. mode) Select input X!
1*2! Chn1*2 ] (sep. sw. mode)
X! $ Aud X! ]
X! & Vid X! ]
X1% * X! & Vid X1% * X! ]
X!*X& G InX! Aud=X( ]
2*9G In2 Aud=+09 ]
X!* X* g In X! Aud= X( ]
1*12g In1 Aud=-12 ]
X!*+G In X! Aud= X( ]
X!*-G In X! Aud= X( ]
X!*G In X! Aud= X( ]
X& G In X! Aud= X( ]
X* g In X! Aud= X( ]
+G In X! Aud= X( ]
-G In X! Aud= X( ]
G In X! Aud= X( ]
X$ > Trb=X% ]
2> Trb=-7.5 ]
+ > Trb=X% ]
– > Trb=X% ]
> Trb=X% ]
X$ < Bas=X% ]
10< Bas=+4.5 ]
+ < Bas=X% ]
– < Bas=X% ]
< Bas=X% ]
1Z Amt X# ]
0Z Amt X# ]
Z Amt X# ]
PVS 204SA • Serial Communication
Additional description
Select input X!
(video and audio).
Select input 2.
(composite video).
Select input 1 of the composite
video group.
Select input X! audio only.
Select input X! video only.
Select input X! video in group
X1% only.
Set a single input's gain (in dB).
Set input 2's gain to +9 dB.
Set an input's attenuation (in dB).
Set attenuation to -12 dB.
Increase an input's gain by 1 dB.
Decrease an input's gain by 1 dB.
Show an input's audio level.
Set the current input's gain (in dB).
Set the current attenuation
(in dB).
Increase the gain by 1 dB.
Decrease the gain by 1 dB.
Show the audio level.
Set the global treble level.
Set treble to -7.5 dB.
Increase the treble by 1.5 dB.
Decrease the treble by 1.5 dB.
Show the current treble level.
Set the global bass level.
Set the bass to +4.5 dB.
Increase the bass by 1.5 dB.
Decrease the bass by 1.5 dB.
Show the current bass level.
Mute audio output.
Unmute audio output.
Show the status of audio mute
0= off, 1 = on.
4-5