Table of Contents
Advertisement
216
SAFETY
Sliding Second Row Seat Lower Anchors
Options for installing two child seats using the
LATCH anchorages in this vehicle:
1. Right and left outboard seating positions
(1 and 3): Install the child seats in the right
and left outboard seating positions using
lower anchorages A and B, and D and E. Do
not use the center seat anchorage, C. If the
child seats do not block the center seat belt
webbing and buckle, the center seat belt can
be used to restraint an occupant or child
restraint in the center seating position.
2. Right outboard and center seating positions
(1 and 2): Install the first child seat in the right
outboard seating position using lower
anchorages A and B. Install the second child
seat using the center anchorages, C and D. Do
not use the outer anchorage closest to the
opposite door, E. Do not use the remaining left
outboard seating position (3) for any occupant.
The center child restraint will block the seat
belt buckle for this position.
WARNING!
Use anchorages C and D to install a
LATCH-compatible child restraint in the center
seating position (2). Do not install a
LATCH-compatible child restraint using
anchorages B and C. This is not a
LATCH-compatible position in your vehicle.
A child restraint installed in the center position
(2) will block the seat belt buckle for the empty
left outboard seat behind the driver (3). Do not
use this seat for another occupant.
Never use the same lower anchorage to
attach more than one child restraint.
If you are installing three child restraints next
to each other, you must use the seat belt and
the center tether anchor for the center posi-
tion. You must use the LATCH anchors to
install the child seat in position (3), behind the
driver. You may use either the LATCH anchors
or the vehicle's seat belt for installing the child
seat in position (1), behind the front
passenger. For typical installation instruc-
tions, see Ú page 217.
Fixed 2nd Row Seat:
Do not install child restraints with rigid lower
attachments in the center seating position. Only
install this type of child restraint in the outboard
seating positions. Child restraints with flexible,
webbing mounted lower attachments can be
installed in any rear seating position.
Fixed Second Row Seat LATCH Positions
WARNING!
Never use the same lower anchorage to attach
more than one child restraint. If you are
installing LATCH-compatible child restraints next
to each other, you must use the seat belt for the
center position. You can then use either the
LATCH anchors or the vehicle's seat belt for
installing child seats in the outboard positions.
For typical installation instructions, see
Ú page 217.
Advertisement
Table of Contents
