Table of Contents
Advertisement
What is the weight limit (child's weight + weight of the child
restraint) for using the Tether Anchor with the seat belt to
attach a forward facing child restraint?
Can the rear-facing child restraint touch the back of the
front passenger seat?
Can the rear head restraints be removed?
Can the buckle stalk be twisted to tighten the seat belt
against the belt path of the child restraint?
Installing A Child Restraint With A
Switchable Automatic Locking Retractor
(ALR):
Child restraint systems are designed to be secured
in vehicle seats by lap belts or the lap belt portion
of a lap/shoulder belt.
WARNING!
Improper installation or failure to properly
secure a child restraint can lead to failure of
the restraint. The child could be badly injured
or killed.
Frequently Asked Questions About Installing Child Restraints With Seat Belts
Weight limit of the Child Restraint
Follow the child restraint manufacturer's
directions exactly when installing an infant or
child restraint.
1. Place the child seat in the center of the
seating position. If the second row seat can
be reclined, you may recline the seat and/or
raise the head restraint (if adjustable) to get a
better fit. If the rear seat can be moved
forward and rearward in the vehicle, you may
wish to move it to its rear-most position to
(Continued)
Always use the tether anchor when using the seat belt to
install a forward facing child restraint, up to the
recommended weight limit of the child restraint.
Contact between the front passenger seat and the child
Yes
restraint is allowed, if the child restraint manufacturer also
allows contact.
The head restraints can be removed in every seating
Yes
position if they interfere with the installation of the child
restraint Ú page 36.
Do not twist the buckle stalk in a seating position with an
No
ALR retractor.
WARNING!
make room for the child seat. You may also
move the front seat forward to allow more
room for the child seat.
2. Pull enough of the seat belt webbing from the
retractor to pass it through the belt path of the
child restraint. Do not twist the belt webbing in
the belt path.
3. Slide the latch plate into the buckle until you
hear a "click."
4. Pull on the webbing to make the lap portion
tight against the child seat.
SAFETY
219
6
Advertisement
Table of Contents
