Table of Contents
Advertisement
Video Scaler card (ISM VS)
Auto Image
— Only for scaled outputs The auto imaging feature automatically
™
sizes and centers the selected input to fill the screen. Auto imaging can be
selected for individual outputs as desired.
Top and bottom blanking — Top and bottom blanking lines can be adjusted to
eliminate artifacts such as unwanted header and footers or VCR noise.
Edge smoothing filter — This feature reduces or eliminates anti-aliasing (jail-bar
effect) and high frequency noise for digital displays.
Blue mode — The switcher can be set to output the sync and blue video signal only,
to help installers calibrate the monitor or projector.
2:2 pulldown — The 2:2 pulldown detection feature is user controllable, and is
used where the input source is PAL video originating on film.
Enhanced mode — Automatic gain control of the video signal is enabled when this
feature is set to on.
Auto memories — Only for scaled outputs. The inputs support 16 auto-recall
memories each, based on the incoming frequency. Information on sizing,
centering, detail, contrast, and brightness is saved.
Input presets — Only for scaled outputs. The ISM 824 has memory for up to 128
presets that allow the user to use SIS commands to save and recall input type
and sampling, color, tint, contrast, brightness, centering, sizing, and filtering
information.
User presets — Only for scaled outputs. Three presets for each input save different
settings for color, tint, contrast, brightness, detail, size, centering, and input
configurations.
Dual Output Wideband card (ISM 2WB)
This card takes any two input signals and passes them through unprocessed on two
15-pin HD connectors.
Single Output Wideband card (ISM 1WB)
This card takes any input signal type and passes it through, unprocessed.
ISM 824 Integration Scaling Multiswitcher • Introduction
1-7
Advertisement
Table of Contents
