Extron electronics ISM 824 User Manual page 110

ISM 824 Multiswitcher Software, cont'd
• Executive mode — The Executive mode locks out some or all of the front panel
features, and has three levels. Select the mode level applicable.
N When any executive mode is enabled, only front panel operations are affected.
• I/O Group Settings — This menu allows the user to make, change, and view
input to output (I/O) groupings.
To set or change I/O groupings, do the following:
1.
Figure 5-10 — ISM 824 I/O Group Settings menus − all groups cleared
2.
N Only inputs can be placed into the input groups, likewise only outputs can be
5-8 ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software
 View mode – This locks out the front panel menu, picture adjustment,
input, and output buttons but allows a user to view the ties.
 I/O ties only – This locks out the front panel menu and picture adjustment
buttons but allows a user to make, remove, and view the ties, recall
I/O presets, adjust gain/attenuation, and control backlight (on/off).
 Off – This turn off the executive mode. Full front panel configuration is
possible.
Full configuration is still available via control software or Ethernet.
When the unit's executive mode is set to View mode, the Video, and Audio
buttons flash when a locked out front panel operation is attempted.
When the unit's executive mode is set to I/O ties only, the Enter, Video, and
Audio buttons flash when a locked out front panel operation is attempted.
Click on the menu to open a new window. This window (see figure 5-10)
shows the free (ungrouped) input and output buttons, and eight grouping
boxes (input groups 1-4, and output groups 1-4).
Drag any input or output button into any of the applicable group boxes.
placed into the output groups.
Grouped inputs only output to the same numbered output group (e.g. in
figure 5-11, input 5 within group 1, only outputs to outputs 1 and/or 4).