Table of Contents
Advertisement
3.
Enter a suitable name (maximum 11 characters, including spaces) in the name
field.
4.
Click Accept to name the preset. The page refreshes and the selected button
shows the entered name. The Select Preset... button reverts to Save Preset
N Click Cancel at any point before saving, to exit without saving any changes.
Slot (output card) configuration
There are four slots, numbered 1 to 4, into which an optional output card can be
installed. Depending on the card type installed, input and user presets can be
saved and recalled on this page. Picture control, input sampling and limited output
and advanced configurations can also be made from this page.
The cards that can be configured are: Universal Scaler, Video Scaler, and Scan
Converter cards. Wideband cards and pass-through outputs cannot be configured
using this Ethernet page. For any particular slot/output card combination, the
cards that can be configured are shown in blue text on the left side of the User
Control page. Other (not configurable) outputs are shown in black text.
Each configurable card has its own page.
Universal Scaler — ISM RGB
The page for the Universal Scaler is shown below:
Figure 6-17 — Universal Scaler output card configuration screen
On the top of this page, the input number that is currently tied to the card's output
tie is shown (see figure 6-17).
ISM 824 Integration Scaling Multiswitcher • HTML Operation
6-17
Advertisement
Table of Contents
