Self Clean; Emptying And Storing; Cleaning The Iron - Singer STI-1810 Instruction Manual

Turn the steam control dial to the minimum position & set the temperature
control knob to the suitable position. Ironing can start.

SELF CLEAN

Set the temperature control knob to the maximum position. Place the steam
iron above a sink and keep pressed the self clean button. Strong steam and
residues will come out of the steam holes to clean the steam chamber. Use this
function once every two weeks.
ANTI-DRIP
This iron is equipped with a drip stop function: the iron automatically stops
steaming when the temperature is too low to prevent water from dripping out
of the soleplate.
ANTI-CALC
The integrated anti-calc system fi lters calc from water to prevent mineral resi-
due build up at the steam chamber.

EMPTYING AND STORING

1. Disconnect the iron from the mains supply outlet.
2. Hold the iron upside down and gently shake it to remove the remaining
water.
3. When the iron gets cool completely, store it vertically in a safe place.

CLEANING THE IRON

1. Disconnect the iron from the mains supply outlet.
2. Use a damp cloth or non-scratching cleaner to remove any deposits from
the sole plate or the cabinet.
Note:
Never use sharp or rough objects to remove the deposits from the sole plate.
Never use any abrasive, vinegar or descaling agents to clean the iron.
7
ENGLISH