SETTING THE CLOCK
Clock can be set while clock time is displayed, at Power ' Off' mode only, and follow
the procedures below:
1.) Press the MEMORY button for more than one
second. The Hour will start flashing.
2.) Adjust the hour by pressing the
or PM.
3.) Press MEMORY button to confirm. Minutes will start
flashing.
4.) Adjust the minutes by pressing the
5.) Press MEMORY button to store the time.
NOTE:
• If button is not pressed within 5 seconds, the clock display stops flashing.
• If the unit is disconnected from the AC power and no batteries installed, you
will need to reset the clock.
PD6900_ib_053102.p65
/
buttons. Set the correct hour for AM
/
buttons. s.
12
12
PROGRAM
AM
MEMORY
PM
PM
31/5/2002, 17:24
AM