Setting The Clock - Emerson PD3500RD Owner's Manual

SETTING THE CLOCK

When the unit is connected to the AC outlet for
the first time the "– –:– –" flashes on the display.
Note: Do not turn the main unit power ' On' . The clock can only be set while the
main unit power is ' Off' .
1.) Press and hold the PROG.
front panel. "12H" flashes on display.
Press SKIP /
"24H" 24 hour or "12H" 12 hour modes.
2.) Press the PROG.
again. Just the Hour digits will continue
flashing.
3.) Press the SKIP
hour, AM or PM.
4.) Press the PROG.
Minute digits will begin flashing.
5.) Press the SKIP
minutes.
6.) Press the PROG.
time display stops flashing and the clock
begins to run.
PD3500RD_102904.p65
button on the
buttons to select between
button on the front panel
/ buttons on the top panel to set the display to the correct
button again. The
/ buttons on the top panel to set the display to the correct
button once more. The
10
10 29/10/2004, 15:36