Setting The Time Of Day - Emerson CKD1137 Owner's Manual

OPERATING INSTRUCTIONS

Setting The Time Of Day

• Connect the power cord to your AC outlet. Make sure to use an outlet that is
always ' live' . Do not use an outlet that is controlled by a wall switch.
• When the unit is plugged in for the first time
the display will show flashing "12:00" (AM).
1.) While the display is ' flashing' , press the
sure to observe the PM indicator to set the hour correctly. If the PM indicator
is ' On' the hour displayed is PM.
2.) Press MIN. button to set the minute correctly. .
3.) Press the STOP/TIME button once, the
time is set. The display remains ' On' .
Note: You may proceed to re-set the time again by pressing the
TIME button once during Power-off, FM or AM modes.
Important Notes !!
If you press and hold the
the clock will change to European 24-Hour format, and vice versa.
PROGRAM REPEAT
PM
AL. 1
CKD1137_053105.p65
STOP/TIME button any time, (except CD mode),
RANDOM POWER FM ST.
AL. 2
9
9
RANDOM
PROGRAM REPEAT
PM
AL. 1
HR. button to set the hour. Be
PROGRAM REPEAT RANDOM
PM
AL. 1
PROGRAM REPEAT RANDOM POWER
PM
AL. 1
1/6/2005, 14:22
POWER
FM ST.
AL. 2
POWER FM ST.
AL. 2
STOP/
FM ST.
AL. 2