Setting The Clock - Emerson PD3686 Owner's Manual

Setting The Clock

When the unit is connected to the AC outlet for the
first time "– –:– –" flashes on the display.
Note: Do not turn the main unit power ' On' . The clock can only be set while
the main unit power is ' Off' .
1.) Press and hold the PRG. button. The "12H" flashes on display.
Press or
indicators) or "12H" 12-hour mode (with AM/PM indicators) as desired.
2.) Press the PRG. button again. Just the Hour digits
will continue flashing.
3.) Press the or
4.) Press the PRG. button again. The Minute digits
will begin flashing.
5.) Press the or
6.) Press the PRG. button once more.
Only the colon (":") continues flashing and the clock
begins to run.
PD3686_021705r.p65
button to select between "24H" 24-hour mode (no AM/PM
button to set the display to the correct hour, , AM or PM.
button to set the display to the correct minutes.
16
16 17/2/2005, 16:14