Setting The Clock; Light Button - Emerson PD6870CH Owner's Manual

SETTING THE CLOCK

1
With the power off, press and
release the PROGRAM/
MEMORY/CLOCK SET button;
"24H" or "12H" will blink in the
display.
4
2
1
Press the CD Skip/Search (
‚ or ( ) ƒ button to set the
current minute.

LIGHT BUTTON

1
With the power on, press the
LIGHT button to temporarily
illuminate the display.
SETTING THE CLOCK
2
3
Press the CD Skip/Search (
or ( ) ƒ button to select the 12
hour or 24 hour mode (see note
below), then press the PROGRAM/
MEMORY/CLOCK SET button „
again; the hour digits will blink.
5
) Press the
MEMORY/CLOCK SET button
and the time will be set.
6
3
1
) ‚ Press the CD Skip/Search (
‚ or (
current hour, then press the
PROGRAM/MEMORY/CLOCK
SET button „ again; the minute
digits will blink.
NOTE: In the 12 hour mode the
display will show AM and PM
indicators. In the 24 hour mode
there are no AM or PM indicators.
"1:00PM" is displayed as "13:00",
"6:00PM" is displayed as "18:00"
and 12 midnight is displayed as
"0:00". The 12 hour mode is used
in the USA and Canada. The 24
PROGRAM/
hour mode is used in Europe, Asia
and other countries.
1
3
) ƒ button to set the
)