Child Safety Feature - Electrolux EHS 6651 P Installation And Operating Instructions Manual

Child safety feature

With the child safety feature, the hob can be
protected against undesirable use.
Switching on the child safety feature
The appliance must be switched on in order to
switch on the child safety feature. However, no
cooking zone must be switched on.
1. Touch the „locking" sensor field
3 seconds.
As acknowledgement, you hear a signal tone.
2. Touch any of the heat setting selection sensor
fields .
In the displays,
feature is activated. The appliance switches off
automatically after a few seconds.
Bypassing the child safety feature
The child safety feature can be bypassed for the
one-time use of the appliance (up to the next
switch-off of the appliance). At the next switch-on,
the child safety feature is automatically activated
again.
1. Switch on the appliance.
If the child safety feature is active, then
indicated.
2. At the same time, touch any of the two heat
setting selection sensor fields
approx. 1 second.
As acknowledgement, you hear a signal tone. The
child safety feature is bypassed up to the point
when you switch off the appliance. The cooking
area can be used normally.
for approx.
will appear, the child safety
and
is
~ 2 sec.
for
~ 1 sec.
19
~ 3 sec.