Required Additional Components; Compatible Realvision™ 3D Products - Raymarine REALVISION 3D Installation Instructions Manual

• Cables included:
– RV-400: 8 m (26.2 ft) attached cable.
– RV-4xx(P/S): 2 m (6.5 ft) attached cable.
– An 8 m (26.2 ft) extension cable (A80477) and a 'Y' cable (A80478) is provided when ordering
transducers as a split-pair.
• Waterproof to IPx6 (surfaces exterior to hull, only), IPx7, IPx8.

2.4 Required additional components

This product forms part of a system of electronics and requires the following additional components
for full operation.
• Compatible RealVision™ 3D sonar-capable device. Refer to
for a list of compatible products.
• For longer cable runs, a transducer extension cable will also be required. Refer to
Spares and accessories, for suitable cables.
Compatible RealVision™ 3D products
The transducer must be connected to a RealVision™ 3D sonar-capable device. The following
RealVision™ 3D sonar-capable products are compatible with the transducer.
1. RVX1000 external RealVision™ 3D sonar module (a LightHouse™ 3 compatible MFD is also
required).
2. LightHouse™ 3 compatible MFD with built in RealVision™ 3D sonar module (i.e.: Axiom, Axiom+
or Axiom Pro MFDs).
12
Compatible RealVision™ 3D products,
Chapter 9