Technical Specification; Physical Specification; Environmental Specification; Realvision™ 3D Sonar Specification - Raymarine REALVISION 3D Installation Instructions Manual

8.1 Technical specification

Physical specification

• Dimensions:
– Length: 347.51 mm (13.68 in) — including fairing block
– Height: 180 mm (7.09 in.) — including cable bend radius
– Width: 114.00 mm (4.49 in) — including fairing block
• Cable length:
– RV-400: 8 m (26.2 ft)
– RV-4xx (P/S): 2 m (6.5 ft)
– An 8 m (26.2 ft) extension cable is also supplied when ordering split pair transducer sets
T70450 and T70451.
• Weight:
– 3.12 kg (6.88 lb.)

Environmental specification

• Operating temperature range:
– –2ºC (28.4ºF) to + 55ºC (131ºF)
• Storage temperature range:
– –20ºC (23ºF) to + 70ºC (158ºF)
• Waterproof rating:
– IPx6 (surfaces exterior to hull, only)
– IPx7
– IPx8
RealVision™ 3D sonar specification
The following specification only applies to RealVision™ 3D products.
• Channels:
– 1 x CHIRP sonar
– 1 x DownVision™
– 1 x SideVision™
– 1 x RealVision™ 3D
• Range:
– CHIRP sonar = 0.6 M (2 ft) to 274 m (900 ft)
– DownVision™ = 0.6 M (2 ft) to 183 m (600 ft)
– SideVision™ = 0.6 M (2 ft) to 91 m (300 ft)
– RealVision™ 3D = 0.6 M (2 ft) to 91 m (300 ft)

Conformance specification

• EN 60945:2002
• IEC 28846:1993
• EMC Directive 2014/30/EU
• Australia and New Zealand: C-Tick, Compliance Level 2
52