Raymarine REALVISION 3D Installation Instructions Manual page 35

i. Connect the cable from each transducer to the Y-cable tails (A80478); check the colored
labels on the cables to ensure that the transducers are connected to the correct Y-cable tail.
ii. Connect an extension cable to the remaining free plug on the Y-cable. See
3D transducer extension
3. Ensuring correct orientation, push the transducer cable (or extension cable) connector fully onto
the corresponding connector on the RealVision™ 3D sonar-capable device (for example, Axiom
RV multifunction display).
4. Turn the locking collar clockwise to secure the cable.
Connections
cable.
RealVision™
35