Method For Adjusting The At; Setting Of The Parameters - JUKI PS-800-12080 Instruction Manual

5. Method for adjusting the AT

5-1. Setting of the parameters

A
B
C
D F
1) Press button A.
2) Press button B.
In the default state, the password that has
been factory-prepared at the time of delivery is
provided.
The factory-provided password is "11111111".
3) Press button C.
4) When you want to enable the AT function,
E
change the setting of D from "Tension disk
release" to "Thread clamp".
In the case of the sewing machine for light-
weight materials, set correction value F to
"-10". After you have set the correction value,
press button E.
– 8 –