Adjusting The Needle Entry Position (In Terms Of Needle Rocking Direction); Adjusting The Longitudinal Play At The Needle Bar; Adjusting The Needle Entry Position (In Terms Of Longitudinal Direction) - JUKI LZ-2290 Series Manual Manual

(7) Adjusting the needle entry position (In terms of needle rocking direction)

1

(8) Adjusting the longitudinal play at the needle bar

As observed from
the face plate side
1

(9) Adjusting the needle entry position (In terms of longitudinal direction)

Standard Adjustment
2
Standard Adjustment
It is not necessary to remove the face plate.
2
3
Needle bar support
base guide shaft
Standard Adjustment
Adjusting needle
entry position
14
Needle bar support base shaft
connecting stud
3
For an
excessive play
Engraved
marker dot
Needle bar
Needle enters the
center of needle slot.
For an
excessive play