7.2
Advanced Fat Channel and Voice Effects Controls
To open the advanced Fat Channel and Voice Effects Controls, click on the Fat Channel menu at the top
right of Universal Control, or click "Fat Channel."
To edit any of the effects, click on the name of the desired processor from the tabs at the top of the
screen. This will bring its controls into focus.
7.2.1 High Pass Filter
Use this control to set the High-Pass Filter frequency threshold for the selected Chan-
nel or Output Bus. The filter's threshold can be set from 24 Hz to 1 kHz. When the
threshold is set to its lowest point, the filter is off. The high-pass filter's slope is -12
dB/8va.
Power User Tip: A high-pass filter attenuates all frequencies below the set threshold. Usethe Fat Channel
high-pass filter to remove unwanted low frequencies from your source signal, rather than trying to EQ them out.
7.2 Advanced Fat Channel and Voice Effects Controls
69