PRESONUS Revelator io44 Owner's Manual page 66

6.1.3 Main Output Controls and Mix Selection
1. Main Out. Master volume control for your Main outputs (your
speakers)
2. Phones. Master volume control for your Headphone Output.
3. Blend. Control your direct monitoring signal in relation to your
software monitoring signal. Left = more direct, right = more from
software.
Revelator io44's Mix Selection Controls let you create four unique
mixes to send to four different outputs. This is useful if, for
example, you have backing music running during your podcast,
but don't want to send the backing music to a guest on your show
calling over Skype. You can create custom mixes for Main, Mix A,
Mix B, or Mix C.
4. Main. Click on this tab to bring up the mix for the Revelator io44
Device.
5. Stream Mix A. Click on this tab to bring up the mix for the Revel-
ator io44 Stream Mix A Output stream.
6. Stream Mix B. Click on this tab to bring up the mix for the Revel-
ator io44 Stream Mix B Output stream.
7. Phones Listen. You can listen to any of the four mixes by click-
ing on the headphone icon. This will route the selected mix to
your headphones instead of the Monitor mix, so you can audition
your other mixes.
8. Mono/Stereo. Each mix can toggled between mono and stereo.
Use the mono control when routing loopback audio to an applic-
ation that only accepts one input, or when you wish to monitor in
mono.
9. Output Fader. Sets the overall output level of the currently selec-
ted mix.
10. Mix Clip. When this light illuminates, your mix is too loud and is
"clipping". You can fix this by lowering the overall output level or
by lowering each channel in the mix.
11. Mix Meter. Displays the overall level of the current mix.
12. Mute. Mutes the currently selected mix.
13. Mix Name. Each Mix name can be customized by clicking on the
default name below the Main output fader.
66