Setting Main Output Level - PRESONUS Revelator io44 Owner's Manual

Power User Tip: If your input level is too loud, the clip indicator will display in red above the input level meter.
This means that your input signal is clipping, and will begin to sound distorted. If your input signal clips, it will
overload the analog-to-digital converters and cause digital distortion. Digital distortion sounds terrible, and can-
not be undone if recorded. Because of this, it's important to keep your eye on this indicator while you're setting
your levels. Check out the Resources section

2.1.5 Setting Main Output level

2.1.5 Setting Main Output level
To set the input level for the Headset and Line inputs, select
their Channels and repeat the above. Note that the Line In
has no option other than input level.
for other recording tips.
By default, the Encoder knob on your Revelator io44 controls
the output level of your Main Outputs—the outputs you have
your speakers connected to. From the home screen, press
the Encoder repeatedly until the speaker icon appears below
the Volume indicator. Then rotate the Encoder to set the
desired Main output level.
20